Language:
Currency:
VAT Mode:
Browse Categories
Browse Departments
Browse Manufacturers
Help & Info

Email SignUp

IF YOU DO NOT SEE WHAT YOU ARE LOOKING FOR CLICK HERE!
Please be sure to check the #1 Coin Changer and Bill Validator repair center in the nation. If you do not feel confident to install the parts your unit needs, click here. This will take you to our service center web-site for information on how to get your units serviced to factory specifications in no time. Or click Click here to go to the repair forum which has very interesting information, links and advice. This CoinValParts website is an ongoing effort to provide Coin Changer and Bill Acceptor parts for all of the major makes and models. We carry parts for Coinco, Conlux, Currenza, Mars, MEI, National, Rowe and many more. Thanks to V2 Design for their help with many of the graphics on this site!

TRC Dispenser Assembly
1 Dispenser Bracket (MC/TRC)
Dispenser Bracket (MC/TRC)
The MEI or Mars dispenser bracket is the top plastic piece holding the coin slides for the TRC Series coin changer. It houses the dispense solenoids as well. It is not subject to the same amount of wear as the bottom plate or the coin slides.
 
Base SKU:64012247
In Stock:Yes
Price: $3.21 
 
2 TRC 5 Cent Payout Slide
TRC Payout Slide
This is the payout slide for the Mars and/or MEI TRC series coin mechs. It is located in the bottom of the unit and is part of the payout mechanism. There are three slides, one for each coin. 5 cent, 10 cent, and 25 cent slides. These slides become worn and dirty with age. It is always a good idea to replace all of them if the changer will not payout change when the coin tubes are full. Click on the description above to see the different slides.
 
Base SKU:6401
In Stock:Yes
Price: $0.75 
 
3 Dispenser Bottom Plate (TRC/MC)
Dispenser Bottom Plate (TRC/MC)
This MEI or Mars dispenser bottom plate for the TRC Series coin changers, may become worn over time. If your unit is having problems with change payout when the coin tubes are full, this is one possible cause. It should be replaced. You should also consider replacing all of the coin slides as these wear out as well.
 
Base SKU:64013181
In Stock:Yes
Price: $2.09 
 
4 PLUNGER & LINK ARM (MC/TRC)
PLUNGER & LINK ARM (MC/TRC)
Link arm plunger assembly used in both 115V and 24V Mars and MEI MC-Series and TRC-Series coin changer. This is a large solenoid plunger in the payout dispense coil.
 
Base SKU:46012456
In Stock:Yes
Price: $15.17 
 
5 DISPENSE SOLENOID SPRING (MC/TRC)
DISPENSE SOLENOID SPRING (MC/TRC)
 
Base SKU:47012337
In Stock:Yes
Price: $0.41 
 
6 DISPENSE SOLENOID 117V (MC/TRC)
DISPENSE SOLENOID (MC/TRC)
Mars/MEI Dispense solenoid coils. The price listed is for one single coil. Be sure to purchase the correct voltage, either 115V or 24V, depending on you unit.
 
Base SKU:4101
In Stock:Yes
Price: $12.08